The Acuity Series features a 1/2" impact-resistant, clear surface. The excellent optical quality enables users to pinstripe the wall side so clearing your lined board becomes smooth and easy.
Features our Level 2, Intense-Use surface suitable for busy boardrooms, training room or lots of brainstorming.
Includes
6 aluminum stand-outs for stylish, confident mounting (Size of standouts 1 1/4” W x 2” D)
Set of Dry Erase Markers, Brush
Client supplies appropriate wall-anchor bolts according to their wall construction (found easily at a hardware store).
Using and Caring for your Clear Future Markerboard
Markers - User should use Low-odor, alcohol based ink, dry erase markers (supplied and available through most national stationery companies... Brands include Dixon, Expo 2, and others). It is recommended that users do not leave marker on board surfaces for an extended length of time.
Cleaning – Because the surface acts more like glass, you can use typical commercial and residential glass cleaners on it. Unlike some whiteboards, a glass cleaner will not affect our “L2” surface adversely! If any ghosting occurs (which can happen on whiteboards or on our boards by using some cheaper markers) you can spray it with glass cleaner and "Wow, its gone!".
Our boards require no other regular maintenance.
Mounting...
You will need to select and obtain robust wall anchors appropriate for your wall material. An experienced installer should select the correct wall anchors. Markerboards can be heavy and must be installed securely.
First, preferably with two or more installers, hold your markerboard panel against the wall to locate anchor holes. Pencil the hole locations onto the wall.
Drill holes for your wall anchors. Using your chosen wall mounting screws, mount the stand out barrels to the wall in exact locations relative to the board mounting holes.
Remove the rear surface covering. Place your board against the stand out barrels, carefully so not
to damage the finish. Insert the screw caps through the holes and into the barrels. Handtighten
to secure your board. Remove the front surface covering. You are done!
Removing the board is as simple as removing the screw caps and lifting the board down. All board
removal from the wall is best done by two or more strong people.
